SAFETY HARNESSES FOR MEN, WOMEN & CHILDREN 
Your Subtitle text
MateSaver® is the Flagship of GameFace Gear
PURPOSE: FOR CREW ONLY
Wear while wiring & gaffing ONE SIZE FITS MOST MSRP $93.45 USD
Restraining Ring on the back
PHOTO CREDIT: ©SCOTTKERRIGAN.COM
MateSaver® Safety Harness was invented because of the needless deaths of mates in the cockpit. Hopefully, this one of a kind, and only safety harness offered for crew will prevent more deaths or near death situations from occurring while hunting for big game.
Accidents do not discriminate but that extra second to grab cutters or yell make the difference between life and death. Unfortunately these men did not have that extra second. This page is dedicated to them and to their families. Please take a moment and read their stories. Links provided for your convenience.
Accidents do not discriminate but that extra second to grab cutters or yell make the difference between life and death. Unfortunately these men did not have that extra second. This page is dedicated to them and to their families. Please take a moment and read their stories. Links provided for your convenience.
In Memory Of
Chris Bowie Morehead City, North Carolina June 16, 1994
Tito Santana San Juan, Puerto Rico August 7, 1998
Billy Verbanas Wilmington, Delaware July 9, 2002
Bruce Bartlett Morehead City, North Carolina December 8, 2004
MateSaver® Safety Harness is a vital piece of equipment in your cockpit. Most extreme professional sports enforce safety equipment. Why should Big Game fishing be any different?
The shoulder straps are made with the same seat belt material that you have in your car. Why not practice safety in the cockpit?
Always be prepared for the unexpected.
Wayne Bisbee of The World Billfish Series: “I am very familiar with your MateSaver® and AnglrSavr® and amongst those who think they’re awesome products. I grew up in Cabo watching sailfish and marlin of all sizes take the local (usually 125 lb. +/-) young mates for an unexpected swim.”
----- Original Message -----
From: "Jimmy Gates" <tontoandtess@yahoo.com>
To: Capt.vinnie@gamefacegearusa.com
Sent: Tuesday, May 08, 2007 11:38 AM
Subject: world records w/MateSaver
Just thought I'd let you folks know: On 2/3/07 and2/07/07 two new world records were caught. Mens Pacific Blue Marlin on 12lb. fly (Enrico Capozzi) and womens Pacific Blue Marlin on 20lb. fly (Stacey Parkerson) with Capt. Scott Jones.
I would not have been able to gaff and hang on to these two fish without MateSaver® harness. Both gaff shots the fish were deep and my hands were in the water. No way could I have stayed in "Spirit of Pilar II" without MateSaver®. Thanks-Jim Gates
* Restraining ring on back for safety
* 1-3/4” pass through buckle (front) meets or exceeds
* 4-2” heavy duty Superloc® fully adjust buckles
How to wear harness: Put on harness just as if you were putting on a jacket. Make sure buckle is in front and the stainless steel D ring is in the back. Make sure the strap that has the parachute buckles lies just underneath your chest muscle. It is very important that the side straps and shoulder straps are very snug. Take the excess strap and thread it back over through the SuperLoc® buckle. Make sure the elastic logo panel is worn behind your neck.
Note: The stainless steel ring on the back of this harness serves as a restraining device only.
Tether not included.
AnglrSavr® Safety Fishing Harness presented by GameFace Gear
PURPOSE: FOR ANGLERS
Wear while angling in the standup position ONE SIZE FITS MOST MSRP $148.45 USD
Restraining Ring on the back
AnglrSavr® Safety Harness suits the angler that has no lower back concerns. The body of the harness is a traditional 12" kidney back support design. This "tried and true" 12" kidney back support was perfected with the additional of a stainless steel Dee ring on the back for safety. The 12"x1" support panel contains marine-treated wood along with 1" closed cell foam padding. This padding is lightweight yet gives maximum support.
The shoulder straps are fully adjustable. The shoulder straps just like on the MateSaver® - are made of the same seat belt material that you have in your car. You can cut and then seal with a hot knife if you like. The elastic in back keeps the shoulder straps right where you want them to be - before, during and after the fight.
You don't need to buy drop straps to attach to the reel. AnglrSavr comes with drop straps for the reel. Consider purchasing GameFace DropStrap Kit if you want to attach your existing rod belt to the AnglrSavr® Safety Harness.
FEATURES:
* For All Tackle
* Restraining ring on back for safety
* Drop Straps to reel attached
* 12" wide kidney support w/
* 1" thick closed cell foam padding
UPC
697120099542 MSRP $148.45
Restraining Ring on the back
AnglrSavr® Safety Harness suits the angler that has no lower back concerns. The body of the harness is a traditional 12" kidney back support design. This "tried and true" 12" kidney back support was perfected with the additional of a stainless steel Dee ring on the back for safety. The 12"x1" support panel contains marine-treated wood along with 1" closed cell foam padding. This padding is lightweight yet gives maximum support.
The shoulder straps are fully adjustable. The shoulder straps just like on the MateSaver® - are made of the same seat belt material that you have in your car. You can cut and then seal with a hot knife if you like. The elastic in back keeps the shoulder straps right where you want them to be - before, during and after the fight.
You don't need to buy drop straps to attach to the reel. AnglrSavr comes with drop straps for the reel. Consider purchasing GameFace DropStrap Kit if you want to attach your existing rod belt to the AnglrSavr® Safety Harness.
FEATURES:
* For All Tackle
* Restraining ring on back for safety
* Drop Straps to reel attached
* 12" wide kidney support w/
* 1" thick closed cell foam padding
How to wear harness:
Put on harness just as if you were putting on a jacket. Make sure
buckle is in front and the stainless steel Dee ring is in the back. Snap the front buckle closed. It is very important that the side straps and shoulder
straps are very snug. Take the excess strap and thread it back over
through the SuperLoc® buckle. Make sure the elastic logo panel is worn
behind your neck.
Wearing with GameFace Rod Belt Large (recommended): First put on GameFace Rod Belt Large. Buckle in front and adjust accordingly. Put on AnglrSavr (see above directions). Place rod in rod belt. Click metal on drop straps to reel (they are attached to the harness). Get ready to reel.
Wearing with customer's own rod belt (not recommended): Put on AnglrSavr first (see above directions). Purchase GameFace Gear DropStrap Kit separately. Per your peference attach DropStrap Kit to your own rod belt. The DropStrap kit can be threaded through a slot on your gear or connect the silver clip to hardware on your own rod belt. See Diagram below for DropStrap Kit directions. Please feel free to email with questions sales@gamefacegearusa.com.
Wearing with GameFace Rod Belt Large (recommended): First put on GameFace Rod Belt Large. Buckle in front and adjust accordingly. Put on AnglrSavr (see above directions). Place rod in rod belt. Click metal on drop straps to reel (they are attached to the harness). Get ready to reel.
Wearing with customer's own rod belt (not recommended): Put on AnglrSavr first (see above directions). Purchase GameFace Gear DropStrap Kit separately. Per your peference attach DropStrap Kit to your own rod belt. The DropStrap kit can be threaded through a slot on your gear or connect the silver clip to hardware on your own rod belt. See Diagram below for DropStrap Kit directions. Please feel free to email with questions sales@gamefacegearusa.com.
Note: The stainless steel ring on the back of
this harness serves as a restraining device only.
Tether not included.
Tether not included.
Content copyright . A1A Boating Services, Inc. All rights reserved.
Mark 1:17 - Fishers of Men
A1A Boating Services, Inc. manufacturing GameFace Gear
2234 North Federal Highway Suite 479 Boca Raton Florida USA 33431
Toll Free 1.877.600.3837
Made in sunny Lake, Park, Florida
earusa.com.
NOTE: THE STAINLESS STEEL RING ON THE BACK OF GAMEFACE GEAR HARNESSES SERVES ONLY AS A RESTRAINING DEVICE. IT IS UP TO THE INDIVIDUAL HARNESS USER TO DETERMINE THE BEST METHOD OF ATTACHING GAMEFACE GEAR HARNESSES SECURELY TO THE VESSEL. TETHER NOT INCLUDED
IMPORTANT: FOR MATESAVER & ANGLRSAVR HARNESSES INSERT EXCESS WEBBING BACK OVER THE TOP OF EACH SUPERLOC BUCKLE TO PREVENT SLIPPAGE.
IT IS UNSAFE TO WEAR THESE HARNESSES LOOSELY
A1A Boating Services, Inc. manufacturing GameFace Gear
2234 North Federal Highway Suite 479 Boca Raton Florida USA 33431
Toll Free 1.877.600.3837
Made in sunny Lake, Park, Florida
CAUTIONARY INFORMATION FOR GAMEFACE GEAR HARNESSES
GAMEFACE GEAR HARNESSES when properly tethered to vessel are only a restraining device to prevent user from going overboard and/or becoming separated from the vessel. GAMEFACE GEAR HARNESSES are neither flotation devices nor lifesaving devices. GAMEFACE GEAR HARNESSES cannot prevent all injuries, but if used properly, may prevent certain injuries. Always wear a flotation device in addition to GAMEFACE GEAR HARNESSES. Attach tether to stainless steel ring located on back of GAMEFACE GEAR HARNESSES. GAMEFACE GEAR HARNESSES are for RESTRAINT ONLY. GAMEFACE GEAR HARNESSES ARE NOT TO BE WORN FOR FALL PREVENTION FROM HEIGHTS. Anchorage points shall be able to withstand forces of more than 2,000 lbs. Before each use, inspect all sewn areas for frayed materials or loose stitching. Inspect all plastic parts for possible cracks. INspect stainless steel components for worn or grooved metal. If there is any question as to the integrity of the harness, DO NOT WEAR. Contact GameFace Gear immediately. Call Toll Free 1.877.600.3837 www.gamefacegearusa.com.NOTE: THE STAINLESS STEEL RING ON THE BACK OF GAMEFACE GEAR HARNESSES SERVES ONLY AS A RESTRAINING DEVICE. IT IS UP TO THE INDIVIDUAL HARNESS USER TO DETERMINE THE BEST METHOD OF ATTACHING GAMEFACE GEAR HARNESSES SECURELY TO THE VESSEL. TETHER NOT INCLUDED
IMPORTANT: FOR MATESAVER & ANGLRSAVR HARNESSES INSERT EXCESS WEBBING BACK OVER THE TOP OF EACH SUPERLOC BUCKLE TO PREVENT SLIPPAGE.
IT IS UNSAFE TO WEAR THESE HARNESSES LOOSELY
